Acquire the Signal
Setting Up a Serial Bus
Your oscilloscope can decode and trigger on:
I
2
C and SPI serial buses if the DPO3EMBD application module is installed
CAN and LIN serial buses if the DPO3AUTO application module is installed
RS-232, RS-422, RS-485, and UART serial buses if the DPO3COMP application module is installed
Using Buses in Two Steps
To quickly use serial bus triggering:
1.
Push
B1
or
B2
and enter parameters of the
bus to trigger on.
You can separately use
B1
and
B2
to view
two different buses.
DPO3000 Series Oscilloscopes User Manual
95
