Analyze Waveform Data
3.
Use the side-bezel menu and the multipurpose
knobs to adjust the vertical and horizontal
settings of the reference waveform.
R1
Vertical
0.00 div
100 mV/div
Horizontal
0.00 s
4.00
μ
s/div
Quick Tips
Selecting and Displaying Reference Waveforms.
You can display all the reference waveforms at the same time. Push the
appropriate screen button to select a particular reference waveform.
Removing Reference Waveforms from the Display.
To remove a reference waveform from the display, push the front-panel
R
button to access the lower-bezel menu. Then push the associated button from the lower-bezel menu to turn it off.
Scaling and Positioning a Reference Waveform.
You can position and scale a reference waveform independently from
all other displayed waveforms. Select the reference waveform and then adjust it with a multipurpose knob. You can do this
whether acquisition is running or not.
If a reference waveform is selected, scaling and repositioning of the reference waveform operates the same way whether zoom
is turned on or off.
188
DPO3000 Series Oscilloscopes User Manual
