© 2020 All Rights Reserved. Packard Bell® is a registered trademark of PBX Holding LLC in the United States and other
countries. Designed and distributed by Southern Telecom Inc. Brooklyn, NY 11220. All other trademarks and trade names are
those of their respective owners.
All product names, trademarks, and registered trademarks are property of their respective owners. All company, product, and
service names used in this document are for identification purposes only. Use of these names, trademarks, and brands does not
imply endorsement.
Smart Monitor Stand
Instruction Manual
Printed in China/Designed in the U.S.
v1. 05/2021
Warranty Information
90-Day Limited Warranty
Territory: United States/Canada
LIMITED WARRANTY TO ORIGINAL CONSUMER
This product as supplied and distributed new by an authorized retailer is warranted by Southern Telecom, Inc. to the original consumer
purchaser against defects in materials and workmanship (“Warranty”) as follows:
To obtain warranty service:
• Visit our customer support portal:
www.customersupport123.com
• Select the brand and model of your device
• Select “Service Request” and fill out the form to begin your inquiry
• Exchanges require dated proof of purchase from an authorized retailer
Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service
center determines this product is defective. Products received damaged as a result of shipping will require you to file a claim with the
carrier.
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable
care, unauthorized modification including software modifications such as the installation of custom firmware. This warranty is voided in
the event any unauthorized person opens, alters or repairs this product. All products being returned to the authorized service center for
repair must be suitably packaged.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL
APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO
OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT
SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE - AT
DISTRIBUTOR’S SOLE DISCRETION - ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR OR
ITS MANUFACTURERS BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES
(SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE
USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY.
NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE
PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE.
Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations
on warranties, so limitation or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other
rights that vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies.
Using the USB Data Ports
Connect the small end of the USB cable to the USB 2.0 micro
port on the stand. Connect the USB connector to an open USB
port on your computer. The USB charging port can charge or
power any device that is powered or charged by USB 2.0.
Using the Wireless Charging Pad
Note:
The wireless charging pad will only charge compatible devices. See
the Compatibility section at the start of this user guide, or consult your
device’s manufacturer’s guide.
1. Connect the mini micro port of the USB charging cable to the
wireless charging input port.
2. Connect the USB input port of the USB cable to an open
USB port on your computer, or another USB power source.
3. When connected to power, the LED indicator will flash RED,
then GREEN, then turn OFF.
4. Place your device in the center of the charging pad. If it does
not begin charging, try repositioning your device. You may
need to remove your case.
Caution:
Do not place any metal or foreign object on the charging pad.
Charging Pad Tech Specs
Input: DC 5V /
≥
2A
Charging Power: 5W
Output Power: 5W
Transmit distance:
≤
8mm
Charging Currency:
≤
1A
Standby power:
≤
200mW
FCC Statement
This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modifications
not explicitly approved by the party responsible for compliance could void the user's authority to operate this
equipment.
Note: this equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance
of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. This
device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
•Increase the separation between the equipment and any other radio device.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
