manualshive.com logo in svg

Tektronix DC503a, Instruction Manual

Share
Download
Tektronix DC503a Instruction Manual Download Page 286

TM 9-6625-474-14&P-3

j. Overhaul.  That maintenance effort (service/action) prescribed to restore an item to a completely

serviceable-operational condition as required by maintenance standard in appropriate technical publications.
Overhaul is normally the highest degree of maintenance performed by the Army. Overhaul does not normally return
an item to like-new condition.

k. Rebuild.  Consists of those services/actions necessary for the restoration of unserviceable equipment to a

like-new condition in accordance with original manufacturing standards, Rebuild is the highest degree of material

maintenance applied to army equipment and is normally reserved for the depot category of maintenance. The
rebuild operation inciudes the act of returning to zero those age measurements (hours/mile, etc.) considered in
classifying army equipment/components.

(1) Services - inspect, test, service, adjust, aline, calibrate, and/or replace.

(2) Fault locate/troubleshoot - the process of investigating and detecting the cause of equipment

malfunctioning; the act of isolating a fault within a system or Unit Under Test (UUT).

(3) Disassembly/assembly - encompasses the step-by-step taking apart (or breakdown) of a repairable

assembly (group numbered itern) to the level of its least componency identified as maintenance significant (i. e.,
assigned an SMR code) for the category of maintenance under consideration.

(4) Actions - welding, griding, riveting, straightening, facing, remachinery, and/or resurfacing.

B-3. EXPLANATION OF COLUMNS IN THE MAC, SECTION Il.

a. Column 1, Group Number.  Column 1 Iists group numbers, the purpose of which is to identify maintenance

significant components, assemblies, subassemblies, and modules with the next higher assembly.

b. Column 2, Component/Assemb/y.  Column 2 contains the names of components, assemblies, subassemb-

lies, and modules for which maintenance is authorized.

c. Column 3, Maintenance Function.  Column 3 lists the functions to be performed on the item listed in

Column 2 (for detailed explanation of these functions, see paragraph B-2).

d. Co/umn 4, Maintenance Category.  Column 4 specifies, by the listing of a work time figure in the

appropriate subcolumn(s), the category of maintenance authorized to perform the function listed in Column 3.

This figure represents the active time required to perform that maintenance function at the indicated category of

maintenance. If the number of complexity of the tasks within the listed maintenance function vary at different
maintenance categories, appropriate work time figures will be shown for each category. The work time figure
represents the average time required to restore an item (assembly, subassembly, component, module, end item,
or system) to a serviceable condition under typical field operating conditions, This time includes preparation time

(including any necessary 

disassembly/assembly time), 

troubleshooting/fault location time, and quality assurance/

quality control time in addition to the time required to perform the specific tasks identified for the maintenance
functions authorized in the maintenance allocation chart. The symbol designations for the various maintenance
categories are as follows:

C. 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . 

O p e r a t o r   o r   C r e w  

O. . . . . .  . . . . . . . . . . . . . . . . . . . . . . .  Oganizational Maintenance

F . . . . . . . . . . . . . . . . . . . . Direct Support Maintenance
H. . . . . . . . . . . . . . . . . . . . . .. Genera l Support Maintenance

L . . . . . . . . . . . . . .. . Specialized Repair Activity 

D. . . . . . . . . ..  Depot Maintenance

Summary of Contents for DC503a













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands