manualshive.com logo in svg

Tektronix DC503a, Instruction Manual

Share
Download
Tektronix DC503a Instruction Manual Download Page 233

TM 9-6625-474-14&P-3

b. The digital multimeter

readout must indicate

between

 

 and

3. Check the      Supply Accuracy

a. Connect the digital multi meter HI test lead to the

cathode of diode CR1733, located on he DC 503A Main
board.

b. The digital multimeter

readout must indicate

between 4.700 and 5.300.

4. check the   

 V Supply Accuracy

a. connect the digital multi meter HI test lead to the

emitter junction of transistors Q1032 and Q1020, located
on the Auxiliary board.

7. Adjust the Standard Timebase Accuracy, C1715
and Optional Timebase Accuracy, Y1710

a. Connect a coaxial cable from the WWVB Frequency

Standard 1 MHz output signal to the DC 503A CH B
INPUT.

b. Set the DC 503A FUNCTION switch to PERIOD B

(AVGS) and the AVGS switch to 

c. Adjust the DC 503A CH B LEVEL control for a stable

display readout on the DC 503A.

d. Adjust the variable capacitor, C1715 (located on the

Main board) until the DC 503A readout indicates between
999.9999 (nSEC) and 1000.0001 (nSEC) with the display
GHz/nSEC illuminated.

b. The digital multimeter must indicate a readout

between 2.500 and 2.900.

NOTE

c. Remove all test leads.

This sets the DC 503A oscillator within 1 part in 

It will take approximately 1 second for the dlsplay to
up-date.

5. Adjust the OFFSET ADJ, R1525 (channel A).

Refer to Fig. 4-5 check set-up and control settings as
shown in the Performance Check procedure, step

e. For the optional timebase adjust, change the

20.

DC 503A AVGS switch to 

a. Adjust the vertical plug-in POSITION control to

center the trace over the center graticule line.

f. Adjust the DC 503,4 CH B LEVEL control for a stable

display readout on the DC 503A.

b. Adjust the DC 503A CH A LEVEL control for a stable

display on the DC 503A and oscilloscope.

NOTE

The Option 1 timebase adjustment 

IS 

made through

an access hole in the back of the oven time base,

c. Adjust the function generator FREQUENCY

Y1710 located on the back side of the Main board.

VARlABLE control and the horizontal plug-in POSITION
control for a 100 kHz display with a 10 

 period.

g. Adjust the oven timebase, Y1710 until the DC 503A

readout indicates between 999.9998 (nSEC-with display

d. Adjust the DC 503A CH A LEVEL control to center

GHz/nSEC illuminated) and 000.00002 ns with display

the displayed squarewave falling edge on the center crt

OVERFLOW illuminated.

graticule line.

NOTE

e.

ADJUST potentiometer R1525, located on the Aux-

iliary board, until the digital multimeter readout indicates

This sets the oscillator within 2 parts in 

 It will

between   

 and 

take approximately 10 seconds for the display to up-
date.

Summary of Contents for DC503a













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands