manualshive.com logo in svg

Tektronix DAS 9221 Option 04, User Manual

Share
Download
Tektronix DAS 9221 Option 04 User Manual Download Page 199

Appendix D: Loading System Software

DAS System User Manual

D–21

The Base System Software and all optional system software are already installed
on all instruments shipped from the factory. You can remove unnecessary
optional system software or application software by using the remove option of
the Install utility. You can install or exclude optional system software and
application software at your discretion when you upgrade your system to new
software versions. Be sure to remove any optional system software that you do
not intend to replace with a newer version when you upgrade the Operating
System Software version; if you are unsure, run the Verify function to be sure
that all of the software on the hard disk is the current version.

There are different optional software packages for the DAS. The optional
software packages are briefly described below.

H

92A16 Support. This package provides the necessary software to operate the
92A16/E Data Acquisition Modules. You can remove or exclude this
software in DAS systems that do not contain 92A16/E Modules.

H

92A60 Support. This package provides the necessary software to operate the
92A60/90 and 92A60D/90D Data Acquisition Modules. You can remove or
exclude this software in DAS systems that do not contain 92A60/90 or
92A60D/90D Modules.

H

92A96 Support. This package provides the necessary software to operate the
92A96 and 92C96 Data Acquisition Modules. You can remove or exclude
this software in DAS systems that do not contain 92A96 or 92C96 Modules.

H

92HS8 Support. This package provides the necessary software to operate the
92HS8/8E Data Acquisition Modules. You can remove or exclude this
software in DAS systems that do not contain 92HS8/8E Modules.

H

92S16 Support. This package provides the necessary software to operate the
92S16, 92S32, 92SX109, and 92SX118 Pattern Generation Modules. You
can remove or exclude this software if your system does not contain pattern
generation modules.

H

Remote Operation Support. This package provides the necessary software to
operate the system remotely using the Programmatic Command Language
(PCL). You can remove or exclude this software in DAS systems that you
will not operate remotely with 92LANP.

H

9202XT Support, XP17 Supplement. This package provides the necessary
software to update the Flash ROM in the 9202XT or 9203XT terminals. It
also provides additional software to service the terminal.

H

9204XT Support, XP100 and XP200 Supplement. This package provides the
necessary software to update the Flash ROM in the 9204XT, 9205XT, and
9206XT terminals. It also provides additional software to service the terminal.

Summary of Contents for DAS 9221 Option 04





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands