Tektronix DAS 9221 Option 04, User Manual

Page: 133 / 276

Reference
3–52
DAS System User Manual
When you direct the output to a network printer, additional information appears
in the overlay as shown in Figure 3–25. The bottom of the overlay displays
status information in the print queue. Function key F5: CLEAR QUEUE lets you
abort any print jobs and clear them from the local print queue on the DAS.
After you enter the changes in the overlay, save the changes by selecting function
key F8: EXIT & SAVE. When you use the Print Screen tool, the output will be
stored in the format and output destination you specified.
Figure 3–25: Print Screen Setup Overlay with Network Printer Selected
The system can communicate with a host computer connected to the Host
RS-232 port. The Communications menu Protocol field lets you specify the
protocol to use: either the DAS 9200 Programmatic Command Language or the
Kermit file transfer protocol. The Programmatic Command Language allows the
host computer to control the system, but typically requires custom software on
the host computer. The Kermit file transfer protocol is widely used and available
on many host computers. You can use the Kermit protocol to move data between
the system and the host; you cannot, however, remotely start or control the
system using Kermit.
Kermit File Transfers