Tektronix DAS 9221 Option 04, User Manual

Page: 173 / 276

Appendix C: Error Messages
DAS System User Manual
C–7
Table C–1: Error Messages (Cont.)
Error Message Explanation
Maximum of 32 channels per group. You cannot add more than 32 channels per group. This message appears if you
attempt to add to a channel group already containing 32 channels.
Maximum of 32 channels per group, channels
truncated. You cannot add more than 32 channels per group. This message appears if you
attempt to add more than the maximum channels to a group; the channels are
truncated to fit a maximum of 32 channels to a group.
Maximum of 32 sections per group. You cannot add any more sections without deleting currently existing ones.
Minimum legal value is 10 ns. Entry is smaller than the allowable minimum value for this field. Enter a value of 10 ns
or larger.
Minimum legal value is 2. Entry is smaller than the allowable minimum value for this field. Enter a value of 2 or
larger.
Missing IRQ Call label. The IRQ Call label has not been defined in the Program menu.
Module [module name]: Fast Clock. The memory storage rate is greater than the maximum clock rate of the module.
Module [module name]: Slow Clock. The module has not detected a clock from the system under test.
Module/Cluster currently running. System
configuration cannot change. Once you’ve started a module or cluster, you cannot alter the configuration until the
module/cluster stops.
Module name already exists. Rename module; use a unique name.
Move cursor to a clock equation. To add or delete items, position the cursor on the equation you want to change and
press the function key.
Move cursor to desired menu. In order to select a menu, position the cursor on the menu name and press the
corresponding function key.
Move cursor to second line of a clock
equation. Position the cursor on the second line of the clock equation and press the function key
again.
Name already exists. Cluster names must be
unique. Rename cluster; use a unique name.
No active fields present. The menu displayed contains no active fields that allow you to make selections.
No assertable or unassertable signals
available. You have not defined any assertable/unassertable intermodule signals in the Signal
Definition overlay to the Cluster Setup menu.
No channels in any group; press Select Menu
key. No channels are assigned to any group. No data can be displayed.
No data acquired for active window; press
Select Menu key. You entered a display menu before an acquisition was performed.
No deskewed channels. The setup and hold values selected may not be valid because the channels have not
been deskewed.
No embedded spaces allowed in this field. Entries in this field cannot contain spaces. Enter a value with no spaces.
No field operation to cancel. There are no selections to cancel. To select a menu, position the cursor on the menu
name and press the corresponding function key.
No Input Signals defined. You selected a Signal Event, but there are no input signals currently defined in the
Signal Definition overlay to the Cluster Setup menu.
No match -- last valid choice will be restored if
field is closed. Your entry does not match an available selection.