Tektronix AWG710, Programmer'S Manual

Page: 99 / 206

Command Descriptions
AWG710 Arbitrary Waveform Generator Programmer Manual
2-69
[SOURce[1]]:FREQuency[:CW|FIXed]
[SOURce[1]]:FUNCtion:USER <file_name>[,<msus>]
[SOURce[1]]:FUNCtion:USER?
USER FUNCtion
<space>
<msus>
?
<file_name>
:
:
SOURce
1
,
<file_name>::=<string>
is the name of a waveform or pattern file to output.
<msus>
(mass storage unit specifier)
::=<string>
is the media on which
the file exists:
MAIN
The internal hard disk drive
FLOPpy
The internal floppy disk drive
NET1, NET2
, or
NET3
The network drive 1, 2, or 3 (specified with the
SYSTem:COMMunicate:LAN
commands)
At
*RST
, this value is set to
"
(null).
SOURce1:FUNCtion:USER "SAMPLE1.WFM","FLOPpy"
specifies the file SAMPLE1.WFM on the floppy disk as the CH 1 output source.
[SOURce[1]]:MARKer[1|2]:VOLTage[:LEVel][:IMMediate]:HIGH (?)
This command sets the high level for the marker output.
Source
[SOURce[1]]:MARKer[1|2]:VOLTage[:LEVel][:IMMediate]:LOW
[SOURce[1]]:MARKer[1|2]:VOLTage[:LEVel][:IMMediate]:HIGH <NRf>
[SOURce[1]]:MARKer[1|2]:VOLTage[:LEVel][:IMMediate]:HIGH?
Related Commands
Syntax
Arguments
Examples
Group
Related Commands
Syntax