Tektronix AWG710, Programmer'S Manual

Page: 40 / 206

Command Syntax
2-10
AWG710 Arbitrary Waveform Generator Programmer Manual
Constructed Mnemonics
Some command headers list a range of mnemonics. When constructing the
command, you select one mnemonic from the list. You then use the mnemonic in
the command just as you do any other mnemonic. Mnemonic ranges can be
presented in any of the following formats:
H MNEMonic[a|b|c]
. The values a, b, and c represent the actual list of
valid selections. You cannot list more than one value.
H
For example, for the command
SYSTem:COMMunicate:LAN:GATeĆ
way[1|2|3]:ADDRess
, the gateway mnemonic could be any of the
following:
GATeway1, GATeway2
, or
GATeway3
. Therefore, a valid usage
of this command would be:
SYSTem:COMMunicate:LAN:GATeway1:ADĆ
DRess
.
H MNEMonic<n>
. The value of <n> is the upper range of valid suffixes. If
the numeric suffix is omitted, the waveform generator uses the default
value of “1”.
These commands specify the source channel to use as a mnemonic in the header.
Symbol Meaning
SOURce1 CH1 signal of waveform generator
These commands specify the output channel to use as a mnemonic in the header.
Symbol Meaning
OUTPut1 CH1 analog signal output
These commands specify the direct D/A converter output to use as a mnemonic
in the header.
Symbol Meaning
DOUTput1 Direct output from CH1 D/A converter
Source Channel
Mnemonics
Output Channel
Mnemonics
Direct D/A Output
Mnemonics
(Except option02)