Tektronix AWG710, Programmer'S Manual

Page: 128 / 206

Command Descriptions
2-98
AWG710 Arbitrary Waveform Generator Programmer Manual
TRIGger:SEQuence:LEVel 200mV
sets the trigger level to 200 mV.
TRIGger[:SEQuence]:POLarity (?)
This command selects the polarity relative to the trigger level that is required to
activate the gate signal. This command is effective only when the waveform
generator is in the gated mode.
Trigger
AWGControl:RMODe, TRIGger[:SEQuence]:LEVel
TRIGger[:SEQuence]:POLarity { Positive | Negative }
TRIGger:POLarity?
:
TRIGger
SEQuence
:
POLarity
<space>
?
Positive
Negative
Positive
means the gate signal is activated when the external trigger signal is
greater (more Positive) than the trigger level.
Negative
means the gate signal is activated when the external trigger signal is
less (more Negative) than the trigger level.
At
*RST
, the parameter is set to Positive.
TRIGger[:SEQuence]:POLarity Negative
selects the
Negative
polarity.
Examples
Group
Related Commands
Syntax
Arguments
Examples