Tektronix AWG710, Programmer'S Manual

Page: 56 / 206

Command Descriptions
2-26
AWG710 Arbitrary Waveform Generator Programmer Manual
ABSTouch (No Query Form)
This command performs the functions that are manually set by pressing the
corresponding front-panel key and button, or by rotating the corresponding knob.
This command works even when the instrument is in the keylock or local
lockout states.
Display
None
ABSTouch <key>[,<state>]
ABSTouch <knob>[,<value>]
<space>
ABSTouch
<key>
<knob>
, <state>
, <value>
<key>::= BOTTom[1] | BOTTom2 | BOTTom3 | BOTTom4 | BOTTom5 |
BOTTom6 | BOTTom7 | SIDe[1] | SIDe2 | SIDe3 | SIDe4 | SIDe5 |
CMENu | RUN | DARRow | UARRow | LARRow | RARRow | SETup | APPL |
EDIT | UTILity | HARDcopy | TOGGle | SHIFt | ENTer | VMENu |
QKEDit | HMENu | TMENu | FTRigger | FEVent | SEVen |MEGa | EIGHt
| KILo | NINe | MILLi | FOUR | MICRo | FIVe | NANo | SIX | PICo |
ONE | D | TWO | E | THRee | F | ZERo | A | POINt | B | SIGN | C |
CLR | G | DELete | INF | RETurn | OUTPut[1] | IOUTput[1]
<knob>::= OFFSet | LSCale | HSHift | SSCale | LEVel | GPKNob
<state>::= ON | OFF | <NR1>
This argument sets the press and release of the specified front panel key. If you
specify ON or nonzero value in this argument, the front panel key is set to press.
If you specify OFF or zero value in this argument, the front panel key is set to
release. When the argument is not specified, 1 is set.
<value>::= <NR1>
This argument sets the rotating direction and quantities of the specified front
panel knob. If you specify a positive value in this argument, the knob rotates
clockwise. If you specify a negative value in this argument, the knob rotates
counterclockwise. When the argument is not specified, 1 is set.
Figure 2–6 shows ABSTouch arguments corresponding to the associated
controls.
Group
Related Commands
Syntax
Arguments