Tektronix AWG710, Programmer'S Manual

Page: 157 / 206

Status and Event Reporting
AWG710 Arbitrary Waveform Generator Programmer Manual
3-11
Status and Event Processing Sequence
As illustrated in Figure 3–10 below, a signal is sent to the OEVR (1) when an
event occurs. If the corresponding bit in the OENR is also enabled (2), the OSS
bit in the SBR is set to one (3). [See Figure 3–12 on page 3–12].
1
2
3
TRIG CAL
7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8
TRIG CAL
7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8
Read using STATus:OPERation:ENABle?
Write using STATus:OPERation:ENABle
To the OSS bit in the SBR
Operation Enable Register
(OENR)
Operation Event Register
(OEVR)
Read using STATus:OPERation[:EVENt]?
Cannot be written
Figure 3-10: Status and Event processing sequence Ċ Operation status block
As illustrated in Figure 3–11, when an event occurs, a signal is sent to the QEVR
(1). If the corresponding bit in the QENR is also enabled (2), the QSS bit in the
SBR is set to one (3). [See Figure 3–12 on on page 3–12].
FREQ
7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8
1
2
3
Read using STATus:QUEStionable:ENABle?
Write using STATus:QUEStionable:ENABle
To the QSS bit in the SBR
Questionable Enable Register
(QENR)
Questionable Event Register
(QEVR)
Read using STATus:QUEStionable[:EVENt]?
Cannot be written
FREQ
7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8
Figure 3-11: Status and Event processing sequence Ċ Questionable status block
Operation Status Block
Questionable Status Block