Tektronix AD007, User Manual

Page: 78 / 98

Appendix A: Specifications
64
AD007 User Manual
Table 8: AD007 certifications and compliances (cont.)
Australia/New Zealand
Declaration of
Conformity – EMC Complies with EMC provision of Radiocommunications Act
per the following standard(s):
AN/NZS 2064.1/2 Industrial, Scientific, and Medical
Equipment:1992
FCC Compliance Emissions comply with FCC Code of Federal Regulations 47, Part
15, Subpart B, Class A Limits.
Pollution Degree A measure of the contaminates that could occur in the
environment around and within a product. Typically the internal
environment inside a product is considered to be the same as the
external. Products should be used only in the environment for
which they are rated.
Pollution Degree 1
No pollution or only dry, nonconductive pollution occurs.
Products in this category are generally encapsulated,
hermetically sealed, or located in clean rooms.
Pollution Degree 2
Normally only dry, nonconductive pollution occurs.
Occasionally a temporary conductivity that is caused by
condensation must be expected. This location is a
typical office/home environment. Temporary
condensation occurs only when the product is out of
service.