Tektronix AD007, User Manual

Page: 24 / 98

Getting Started
10
AD007 User Manual
Installing the Adapter on the Network
Use the procedures in this section to install the AD007 GPIB-LAN
Adapter on a network.
Contacting the Network Administrator
Please contact your local network administrator or network services
before connecting the AD007 adapter. For your convenience, use the
network information card included in the Read This First guide, or
make two photocopies of the form shown in Figure 4.
Does network support DHCP or BOOTP? Yes
-
No
-
If no, please note:
Subnet mask ____.____.____.____
Router address ____.____.____.____
(Enter these numbers on network setup page of the adapter, refer to user
manual)
Comments
___________________________________________________________
___________________________________________________________
(Network Administrator: Keep one copy and give one copy to the user.)
Network Information Card
AD007 GPIB-LAN Adapter
Ethernet Hardware Address____:____:____:____:____:____
(User: copy address from the label on the back of the AD007 adapter)
Internet (IP) Address____.____.____.____ Host Name______________
(Network Administrator: for ease of set up, a static IP address is preferred)
Network drop (subnet) number and/or physical location
___________________________________________________________
(assigned by network technician)
Figure 4: Network information card