Edit Call Types
For most installations, the standard call types will not require editing. However, installations utilizing
LI122BL dome lights must modify any call types used in the facility to ensure proper annunciation.
Figure 23 - Call Types List
Select the call type to modify from the
Call Types
list shown above and click the
Edit
button
.
Figure 24 - Dome Light Color Selection
In this section, the Blue selection determines the flash rate of the blue LED on all LI122BLs. The Red
selection determines the flash rate of the red LED on all LI122s. In this example, we are editing the
dome light annunciation for the Emergency call type. Note that the settings shown above would result
in a medium flash rate on the red LED of LI122s zoned to display the Emergency call, however, any
LI122BLs zoned to display the call would not annunciate the Emergency call, since the selected flash
rate is
Off
.
Choose the appropriate annunciation settings for the selected call type and click
Apply
. Choose
File>Save Configuration
before proceeding.
Note
:
If dome light annunciation colors are altered, perform a careful walk-through test of
the dome light annunciation to ensure that the correct lights illuminate for the desired
call.
Copyright
©
TekTone Sound and Signal Mfg., Inc. All Rights Reserved
IL992 Tek-CARE120 Installation Manual
|
35
Configuration Setup
