BA_ECO-Cube_190815_EN.docx
9
15.08.2019
5
Storage, Transport and installation of the system
Overturning or not permanently fixed equipment may represent a danger to life
and limb.
The system must be secured against overturning and sliding during the storage and
transport. Do not stand under or next to the load when lifting and lowering. Lift trucks
or forklift trucks or transport cranes must have sufficient minimum loading.
An assembly of the main components only is allowed after transport. Other-
wise, the system may be damaged by transport actions.
Check before transport, that the main components (see picture) are not assembled
together. If the system should be transported again after installation, the main com-
ponents must be disassembled again.
1x
1x
1x
1x
1x
The system may only be installed on suitable flooring. Falling over or func-
tional impairments may otherwise represent a danger to life and limb.
The substrate must be vibration free and horizontally
aligned. The operator has to verify the viability of the ground.
The system must be secured to the substrate. For this use
the lag bolts DIN 571 – M8x80, in connection with the dow-
els S10.
Alternatively, the mounting brackets at the inside of the feet
can be used. Therefore the mounting brackets must be
mounted outside to the feet.
The dowels S10 are suitable for the following building materials:
concrete, lime sandstone, natural stone with dense structure, solid brick of
light concrete and solid brick. In the case of deviating building materials, dif-
ferent fastening materials must be used.
The system must be protected from the weather. Otherwise, the system func-
tions may be impaired.
The system must be stored in a dry place and protected from moisture during
transport.
If the plant is to be installed outdoors, a roof extension is required.
