BA_ECO-Cube_190815_EN.docx
7
15.08.2019
3
Intended use
The filter system is mainly used for the extraction and filtering of dust and fumes.
A lot of dust types as for example welding fume and cutting particles may burn when sources of ig-
nition are supplied. The operator must take appropriate measures to avoid these specific risks.
Improper use of the equipment can lead to damage to individual parts and endan-
ger life and limb!
The system must
not
be used for the extraction of oil containing welding smoke, explo-
sive dusts and gases, hybrid mixtures, burning or glowing substances, gases, water, etc.
The system must also not be operated in explosive zones.
The supplied step ladder (see chapter 8) may only be used to reach the control elements
- but not for other purposes.
Please contact the manufacturer in case of doubt!
The polluted air is detected by detectors. A pipe line which is connected to the suction supports
passes the air through the spark labyrinth into the filter device. The spark labyrinth reduces the risk
of fire if, against the intended use, isolated spark-bearing particles are drawn in. In the filter housing
the particulate pollutants are deposited on the surface of the installed filter cartridge. The cleaned
air is guided by the fan via the exhaust pipe to the outside or back into the working space.
The filter cartridges are automatically cleaned pneumatically. The cleaned dust falls downwards
and collects in the dust collection container. The different dedusting methods are described in the
enclosed operating manual of the control unit.
The service life of the filter cartridges depends strongly on the particular conditions of use. It cannot
be determined beforehand.
