BA_ECO-Cube_190815_EN.docx
20
15.08.2019
•
Unhook the cartridge holder from the cartridge guide (pos. E) and remove from the unit to-
gether with the filter cartridge and the waste bag.
•
Loosen the cylinder nut (pos. F) outside on the cartridge base. The cylinder nut is not to be
gripped directly with hands, but from the outside through the bag.
•
The cartridge holder is to be drawn dust-free past the filter cartridge from the disposal bag.
Likewise, the displacer (pos. D) is be removed dust-free from the filter cartridge.
•
Carefully seal the disposal bag (e.g. with cable ties) and dispose of the contaminated filter
cartridge properly in a suitable container and according to the national or regional regula-
tions.
•
Do a visual control and clean the filter area if necessary.
•
Place the displacer in the new filter cartridge so that the screw of the displacer is inserted
through the opening in the cartridge base. Tighten the displacer with the cylinder nut from
the outside.
Only use original replacement filter!
Dispose of the filter cartridges according to the statutory provisions
•
Push the new filter cartridge with the displacer into the cartridge guide of the system and
engage with the cartridge holder.
•
Screw the locking screw tight in the cartridge holder.
•
Close the service door by closing the door handles. Also the door handle, which is
equipped with a lock, must be locked again.
•
After completion of all maintenance work the system can be reconnected to the power
supply and connected to the external compressed air supply.
