TEFAL EXPERTCOOK, Manual

Page: 11 / 108

11
EN FOR THE APPLIANCE AND ALL FUNCTIONS
• Carefully wipe the outside of the bowl (especially the bottom). Make
sure that there are no foreign residues or liquid underneath the bowl
and on the heating element – fig.5 .
• Place the bowl into the appliance, making sure that it is correctly
positioned – fig.6 .
• Make sure that the inner lid is correctly in position.
• Close the lid in place so you hear a “click”.
• Install the power cord into the socket of the multicooker base and then
plug into the power outlet. The appliance will beep and all the lights
on the control panel will flash. Then the screen display will show «----»,
and all the lights will switch off. The appliance enters into standby
mode, you can select the menu functions as you wish.
• Do not touch the heating element when the product is plugged in or
after cooking. Do not carry the product in use or just after cooking.
• This appliance is only intended for indoor use.
Never place your hand on the steam vent during cooking, as there is a
danger of burns – fig.10.
Once cooking starts, if you wish to change the selected cooking menu
because of an error, press «KEEP WARM/CANCEL» key and re-choose
the menu you want.
Only use the inner bowl provided with the appliance.
Do not pour water or put ingredients in the appliance without the
bowl inside.
The maximum quantity of water + ingredient should not exceed the
highest mark inside the bowl - fig.7.