15
14
EN
EN
The humidification
capacity is too low
There is natural or artificial air
replacement in the room which
interfere the increase of HR%.
Check if doors and windows are closed.
Check if there is no air conditioning
working in the room.
The air inlet grids and nozzle
could be blocked.
Remove any blocking items from the
grids and the nozzle.
There is too much scale in the
water basin or on the piezo
part.
Clean the water base according to
Maintenance Instructions.
The Humidity selected rate is
too low.
Increase Vaporization volume level in
MANUAL MODE.
Increase Humidity setting in MANUAL
MODE.
The ambient humi-
dity is too high
The appliance is working in
CONTINUOUS MODE.
Change the mode.
The humidity target is too high. Select a lower RH% target.
There is condensa-
tion in the room
The room temperature is too
low.
Heat up the room or turn down the
humidity target.
The appliance is too
noisy
The appliance is unstable.
Place the appliance on a flat and stable
surface.
There may be resonance in
water tank due to low water
level.
Refill the water tank.
The mist suddenly
stops coming out
Programmed timer period has
run out.
Turn your product on.
The water level indicator is
blinking.
Refill the water tank.
The target humidity level is
reached.
The warm mist func-
tion doesn’t produce
any warm humidity
The product is in warm-up
phase.
Wait a few minutes till the end of the
phase.
The mist is too fine to feel the
warmth.
Increase the mist volume level.
The room temperature is too
cold and the mist may cool
down too quickly.
Increase the mist volume level and Heat
the room up.
The appliance does
not work with no
display on screen
There is no power supply.
Plug in power plug in main sockets.
There is abnormal
smell mist
It’s first use of appliance.
The smell will disappear after several
minutes of use.
The water used is dirty or has
rested too long in water tank or
water base.
Clean the water tank and the water
base according to the Maintenance
Instructions.
Mist fog is coming
out from around
nozzle
There are apertures between
the nozzle, the cover and the
water tank.
Reposition the cover and check if the
nozzle is well plugged in the cover.
The mist does not
start.
The appliance shows E1 error
on the screen
Close the lid correctly, the appliance will
start.
There is not enough water in
the water tank of the appliance,
or you have just filled your
water tank.
Check if the NO WATER indicator is
displayed on the screen. Proceed with
refilling the water tank of your appliance.
After filling the water tank, wait 2 to 3
minutes until the appliance outputs mist.
ENVIRONMENT PROTECTION FIRST !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
If this appliance uses batteries: help us look after the environment, by not throwing away
your used batteries.
Instead, bring them to anyone of the special battery collection points. Do not throw them
away with your household waste.
These instructions can also be found on our internet site www.tefal.com
This user manual is downloadable online.
