44
CS
Before to proceed to start up, close electrical line main switch (not supplied with the unit): the green
led (line) will be lit up.
All the units are provided with microprocessor control that manages all the various functions of
the unit.
To start the unit, activate the humidity switch by rotating the knob or by pressing the instrument
keyboard (depending on the type of instrument installed): the green light (
WORKING
) will be
ON
.
SIGNALLING LEDS PANEL
Units are provided with signalling light panel that indicates unit operational status.
Below is reported a brief description of their meaning.
Power supply, GREEN light (POWER):
indicates that the uniti is proprerly supplied.
GREEN light (REQUEST):
Indicates that the humidistat requires the machine to work.
GREEN LIGHT (COMPRESSOR):
Indicates that compressori s working.
RED LIGHT (ALARM):
indicates thwe alarm status of the machine.
MACHINE STOP (STAND BY)
If the machine is connected, it works with automatic system controlled by a humidostat.
When the humidostat activates the defrost system, only the light
Power
is
ON
When one wishes to turn off the machine, the knob of the humidostat must be set on position
0
.
Before the first Start-up, the machine must be kept in
STAND-BY
position at-least for 5 hours.
REMOTE CONTROL
It is possibile to use a remote control with the machine. In this case must be used a remote humidostat
to be connected to the terminal boxes of the electric panelboard in place of the standard humidostat.
It is also possible to have an ON-OFF switch to be electrically connected in series to the humidostat.
CONTROL AND SAFETY DEVICES
CONTROL DEVICES
For temporary stop (night-time, weekend, etc.) never break the power supply and
strictly follow the procedures illustrated in the paragraph “Machine Stop”.
Before the first Start-up, the machine must be kept in STAND-BY position at-
least for 5 hours.
