Programming user information
Programming door groups
Note:
Typically, door groups will be configured using TecomC4. The following
information is for using CTPlus to program door groups if required.
A NAC in Classic mode inherits the door groups of the Challenger
Plus
it is
connected to, so is limited to 255 door groups. You can add NAC doors to
existing door groups or create new Challenger
Plus
door groups for the NAC
doors.
A NAC in IP Direct or IP Extended mode uses NAC door groups, of which there
can be up to 10,000.
To add a door group to a NAC or Challenger
Plus
panel, follow these steps:
1. Click the
Door groups
button on the
User access
ribbon tab to open
the Door groups form.
2. On the Door groups form, click the
New
button in the toolbar to add a
new door group record.
3. Enter a description for the door group in the
Record
description field.
4. Ensure the
Panel
field is set to the correct NAC or Challenger
Plus
panel.
If necessary, click the
Browse
button next to the
Panel
field to select
the NAC or Challenger
Plus
panel.
5. On the
Door group
tab, click the
Assign
button to open a dialog to
assign doors to a door group. In the dialog, select the
Time zone
for the
door group. Move the required doors from the
Available doors
list to the
Assigned doors
list using the
button. Areas can be removed from
the
Assigned doors
list using the
button. Click the
OK
button when
finished.
6. Click the
Save
button in the toolbar to save the door group record.
Refer to the
ChallengerPlus Programming Manual
for more information on door
groups. Refer to the
CTPlus Operators Manual
or CTPlus online help for more
information on the Door groups form.
Programming users
Note:
Typically, users will be configured using TecomC4. The following
information is for using CTPlus to program users if required.
A NAC in Classic mode inherits the users of the Challenger
Plus
panel it is
connected to, so is limited to 2,000 users (or 65,535 users if the Challenger
Plus
panel has a TS1084 Memory Expansion Module).
A NAC in IP Direct or IP Extended mode has its own user database of up to
250,000 users. You can add new users for the NAC, or configure NAC access
and credentials for existing users in the CTPlus database.
