Description
Enter an optional description for the RAS.
Bus format
This read-only field shows the bus format used by the bus for the defined
RAS
no
.
See the “Bus options” section on page 45.
Model
If the
Bus format
field is set to
Tecom
, then the RAS model can be selected
from the following:
CA1110
– 2 line no reader
CA1111
– 4 line no reader
CA1115
– 2 line with reader
CA1116
– 4 line with reader
TS0003
– 3/4 LED keypad
TS0004
– 4 LED arming station
TS0006
– Heavy duty keypad
TS0007
– Mag swipe reader with keypad
TS0008
– Mag swipe reader
TS0801 - 8 Area RAS
TS0804 - 16 Area RAS
TS0862
– Single Door Controller
TS0870
– Smart card reader range
TS0870H
– Smart card reader range
TS0870D
– Smart card reader range
TS1001
– Touch Screen RAS
TS1162
– 3 LED arming station
No model programmed- Default setting. Choose the model if it is in the list
above provided otherwise the system cant auto detect.
Aperio EAC
If the
Bus format
for the bus is set to
Aperio
, then enter the Aperio EAC
(Electronic Access Control) number in this field. Values can range from 1 to 255.
Assigning DGPs
DGPs attached to one of the Network Access Controller’s buses must be
assigned to the NAC. DGPs can be assigned on the
Assigned DGP
tab of the
DGPs form. Click the
DGPs
button on the
Panel programming
ribbon tab to
open the DGPs form.
