TECOM AW4062 User Manual Download Page 44

Page: 44 / 81

Router Inalámbrico AW4062 4-port ADSL2+ Router User‘s Manual

Page 44 of 81

Fields in this page:

Field

Description

Enable Port

Forwarding

Check this item to enable the port-forwarding feature.

Protocol

There are 3 options available: TCP, UDP and Both.

Comment

Specify the rule name.

Enable

Check this item to enable this entry.

Remote IP Address

The source IP address from which the incoming traffic is allowed. Leave blank for

all.

Public Port

The destination port number that is made open for this application on the

WAN-side

Local IP Address

IP address of your local server that will be accessed by Internet.

Local Port

The destination port number that is made open for this application on the

LAN-side.

Interface

Select the WAN interface on which the port-forwarding rule is to be applied.

Summary of Contents for AW4062

















































































Search results

Summary of Contents for AW4062

Reviews:

Related manuals for AW4062

Brands by name

Popular brands

TECOM AW4062, User Manual

Search results

Summary of Contents for AW4062

Reviews:

Related manuals for AW4062

Brands by name

Popular brands