TECOM AW4062 User Manual Download Page 38

Page: 38 / 81

Router Inalámbrico AW4062 4-port ADSL2+ Router User‘s Manual

Page 38 of 81

network, they should both be configured with RIP.

Your ISP requests that you run RIP for communication with devices on their

network.

Fields on the first setting block:

Field

Description

RIP

Enable/disable RIP feature.

Function buttons for the second setting block in this page:

Apply Changes

Click to save the setting of this setting block to the system configuration

Fields on the second setting block:

Field

Description

Interface

The name of the interface on which you want to enable RIP.

Receive Mode

Indicate the RIP version in which information must be passed to the DSL device in

order for it to be accepted into its routing table.

Send Mode

Indicate the RIP version this interface will use when it sends its route information

to other devices.

Summary of Contents for AW4062

















































































Search results

Summary of Contents for AW4062

Reviews:

Related manuals for AW4062

Brands by name

Popular brands

TECOM AW4062, User Manual

Search results

Summary of Contents for AW4062

Reviews:

Related manuals for AW4062

Brands by name

Popular brands