Router Inalámbrico AW4062 4-port ADSL2+ Router User‘s Manual
Page 37 of 81
Fields in this page:
Field
Description
IGMP Proxy
Enable/disable IGMP proxy feature
Function buttons in this page:
Apply Changes
Click to save the setting to the configuration.
Undo
Discard your settings.
4.6.4.
RIP Configuration
RIP is an Internet protocol you can set up to share routing table information with other
routing devices on your LAN, at your ISP’s location, or on remote networks connected to
your network via the ADSL line.
Most small home or office networks do not need to use RIP; they have only one router,
such as the ADSL Router, and one path to an ISP. In these cases, there is no need to
share routes, because all Internet data from the network is sent to the same ISP gateway.
You may want to configure RIP if any of the following circumstances apply to your
network:
Your home network setup includes an additional router or RIP-enabled PC (other
than the ADSL Router). The ADSL Router and the router will need to communicate
via RIP to share their routing tables.
Your network connects via the ADSL line to a remote network, such as a corporate
network. In order for your LAN to learn the routes used within your corporate
