TECOM AW4062 User Manual Download

Page: 21 / 81

Router Inalámbrico AW4062 4-port ADSL2+ Router User‘s Manual

Page 21 of 81

Fields in this page:

Field

Description

Wireless Access

Control Mode

The Selections are:

Disable

Disable the wireless ACL feature.

Allow Listed

When this option is selected, no wireless clients except those whose MAC

addresses are in the current access control list will be able to connect (to this

device).

Deny Listed

When this option is selected, all wireless clients except those whose MAC

addresses are in the current access control list will be able to connect (to this

device).

MAC Address

Enter client MAC address and press “Apply Changes” button to add client MAC

address into current access control list.

Function buttons in this page:

Apply Changes

Click to commit changes.

Summary of Contents for AW4062

















































































Search results

Summary of Contents for AW4062

Reviews:

Related manuals for AW4062

Brands by name

Popular brands

TECOM AW4062, User Manual

Search results

Summary of Contents for AW4062

Reviews:

Related manuals for AW4062

Brands by name

Popular brands