TECOM AW4062 User Manual Download Page 54

Page: 54 / 81

Router Inalámbrico AW4062 4-port ADSL2+ Router User‘s Manual

Page 54 of 81

Fields in this page:

Field

Description

Enable

Check to enable the selected route or route to be added.

Available Interfaces

All Ethernet interface,PVC interface and wireless interface will show.

Grouped Interfaces

Group any interface in Available Interface column to this field.

Buttons in this page:

Apply Changes

Push to apply changes

4.8.6.

IP QoS

QoS (Quality of service) is the ability to provide different priority to different applications,

users, or data flows, or to guarantee a certain level of performance to a data flow. For

example, a required bit rate, delay, jitter, packet dropping probability and/or bit error rate

may be guaranteed. User can configure QoS parameters in the following page:

Summary of Contents for AW4062

















































































Search results

Summary of Contents for AW4062

Reviews:

Related manuals for AW4062

Brands by name

Popular brands

TECOM AW4062, User Manual

Search results

Summary of Contents for AW4062

Reviews:

Related manuals for AW4062

Brands by name

Popular brands