TECO 36 SPECIAL, Instruction Manual

Page: 97 / 301

User’s manual 97
EN
9.5.c WHEEL DEMOUNTIN G
23
23a
- Insert and position the bead lifting tool on the mounting tool head (fig.23).
When working with alloy rims or rims with delicate paintwork, you are advised to remove
the bead lifting tool before proceeding with the demounting.
WARNING
Grip the bead lifting tool firmly during use.
- Lift the upper bead above the rear part of the demounting tool head (fig.23a) and push
one part of the upper bead into the rim channel by pushing downwards on the side wall
of the tyre near the operator.
- Press the turntable drive pedal , making the wheel turn clockwise. The upper
bead will be automatically guided up over the rim edge (fig. 24).
- Repeat the last three points to detach the lower bead.
24
D