Tecno-gaz VITAL TEST, User Manual

Page: 71 / 133

range for the lower limit of SpO
2
Alarm is from 0 to the upper limit of SpO
2
Alarm
minus 1.
‹ Press
Up Arrow
or
Down Arrow
button to increase or decrease values.
‹
SpO
2
Hi Alarm
is always higher than
SpO
2
Lo Alarm
at least 1%.
‹ Press
Function
button, confirm the alarm range setup.
‹ Press
On/Off
button to exit menu, and return to measuring state.
3.3.10 PR Alarm setup
User can use
PR Hi Alarm
and
PR Lo Alarm
in menu to adjust pulse rate alarm limits.
In default configuration setup, the
PR Hi Alarm
and
PR Lo Alarm
for
Neo
mode are 200
and 100; while they are 120 and 50 for
Adu
mode.
Set the PR limits as following procedure:
‹ Choose
PR Hi Alarm
in the menu, press
Function
button to enter setup. The
PR
Hi Alarm
box changes from real line to broken line. The adjustable range of the
upper limit of PR Alarm is from 1 plus the lower limit of PR Alarm to 250.
‹ Press
Up Arrow
or
Down Arrow
button to increase or decrease values.
‹ Choose
PR Lo Alarm
in menu, press
Function
button enter setup. The
PR Lo
Alarm
box changes from real line to broken line. The adjustable range for the
lower limit of PR Alarm is from 0 to the upper limit of PR Alarm minus 1.
‹ Press
Function
button, confirm the alarm range setup.
‹
Hi Alarm
is always higher than
Lo Alarm
at least 1 bpm.
‹ Press
On/Off
button to exit menu, and return to measuring state.
3.3.11 Patient ID No. setup
The oximeter can support 100 patient ID, and 300 hours data storage time.
When entering menu, press
Function
button to set ID (valid range is from 1 to 100). ID
display box on interface will change from real line to broken line.
After choosing ID, press
Function
button to confirm the setup. If the ID exists, dialog box
will pop up for confirming to cover the former data.