3
OXIMETER OPERATION
3.1
Turn On the Oximeter
Power-On-Self-Test (POST) verifies the oximeter works properly and is safe to use.
Proper operation of the oximeter is verified every time it is turned on as described in
the procedure. The verification procedure POST needs approximately few seconds to
complete. When the oximeter is turned on, POST automatically tests the circuitry and
functions of the oximeter.
Press the
On/Off
button for 1s to turn on the oximeter.
At first the LOGO is shown.
If the POST is successfully finished, the oximeter sounds a tone, then enter the
main interface.
If there is error during POST, the following error codes will display on the screen:
Error code
Indication
Error 01
Indicates error for Low battery
Error 02
Indicates error for SpO
2
board
Error 03
Indicates error for Main control board
Summary of Contents for VITAL TEST
