6
MAINTENANCE
WARNING
Before cleaning the oximeter or the sensor, make sure that the oximeter is switched off.
The oximeter does not require calibration.
If service is necessary, contact qualified service personnel or your local manufacturer
representative.
Before using the oximeter, do the following:
■
Check if there is any mechanical damage;
■
Verificare che non vi siano alcuni Danni meccanici;
■
Check if all the outer cables, inserted modules and accessories are in good condition;
■
Verificare tutti I cavi esterni, che vi siano inseriti moduli e gli accessory in buone
condizioni
■
Check all the functions of the oximeter to make sure that the oximeter is in good
condition.
If you find any damage on the oximeter, stop using the oximeter on patient, and contact
the biomedical engineer of the hospital or Customer service immediately.
Periodic Safety Checks
It is recommended that the following checks be performed every 24 months:
Inspect the devices for mechanical and functional damage
Inspect the relevant labels for legibility
All the checks that need to open the oximeter should be performed by qualified customer
service technician. The safety and maintenance check can be conducted by persons from
this company. You can obtain the material about the customer service contract from the
local company’s office.
If the hospital or agency that is responding to using the oximeter does not follow a
satisfactory maintenance schedule, the oximeter may become invalid, and the human
health may be endangered.
Cleaning
You can surface-clean and disinfect the oximeter and sensor.
To surface-clean the oximeter:
Summary of Contents for VITAL TEST
