TECNICOMAR ECOmar 145 S, Instructions For The Installation, Use And Maintenance, Page: 83 / 86

83
After installation is completed, provide the following performance data:
1. Location of test:
Date of test:
Power supply during test operation (voltage, frequency, phase):
Clockwise rotation of Macerating pump checked: YES NO
Clockwise rotation of Sea Water Pump checked: YES NO
Open/Close of Solenoid valve (seawater inlet device, if supplied) checked: YES NO
Pressure regulator valve at seawater line (if supplied) checked (calibrated at approx. 1 Bar): YES NO
Clockwise rotation of filling pump 1 checked: YES NO
Complete priming of the filling pump 1 checked: YES NO
(if present) Clockwise rotation of filling pump 2 checked: YES NO
(in present) Complete priming of the filling pump 2 checked: YES NO
Complete priming of the H
2
O
2
dosing pump and check settings: YES NO
Complete priming of the ECOFLOC dosing pump and check settings: YES NO
Complete opening of “sludge discharge valve (V2)” checked: YES NO
Activation pressure switch (only on PP version)
(check pressure activation as per commissioning certificate)
YES NO
Set correctly the “discharge time” (emptying the treatment tank): YES NO
Set correctly the “sludge discharge time” (emptying the treatment tank): YES NO
Max Power consumption (kW):