TECNICOMAR ECOmar 145 S, Instructions For The Installation, Use And Maintenance, Page: 68 / 86

68
25
After a prolonged stop /
On condition
Seawater pump

Manually start the pump and stop immediately in case
of no rotation of the impeller.

Remove the back cover and rotate the axis manually.
Motor burns due to locked impeller.
26 After a prolonged stop

Hydrogen Peroxide tank;

ECOFLOC tank.
Replace the chemical products. Sewage treatment is no longer assured.
27 After a prolonged stop Multimedia Filter Station

Rinse Multimedia Filter Station (refer to FIRST
START UP PROCEDURE section) for the media
stabilization.

Replace all the media in each tank, if necessary.
Sewage treatment is no longer assured.
28 After a prolonged stop Bag filter Replace bag cartridge and O-ring(s) if necessary. Sewage treatment is no longer assured.
29 After a prolonged stop U.V. Sterilizer

Reinstall the germicide lamp(s) in the U.V. chamber(s)
or replace if necessary;

Clean and sanitise pipes downstream the U.V. system.
Sewage treatment is no longer assured.
30 After a prolonged stop
Complete system
(only for 3-phase power supply)

On Main Control box set operation mode to “manual”.

Check the rotation sense of each pump.
System does not work effectively.