Service guide
March 2001
9
2.2 Covers
5550 112 Cover 1
Release at lower studs first by
gently pulling outwards and lift off
at upper studs. Install in reverse
order.
5550 034 Assy, Cover 3
w/badge
5550 035 Assy, Cover 2
w/keypad
The side covers are fastened with
3 screws each (see picture).
Remove Cover 1 to get access to
the two upper screws.
Cover 3 comes with the badge
and Cover 2 with the keypad.
5550 027, Assembly, harness
#7, connector PCB to keypad
(not included in 5550 035) must
be disconnected from the keypad
in order to allow Cover 2 to be
put aside.
Note the little orientation tab of
the connector when refitting.
Take care to fit harnesses well
inside when installing covers.
Lower stud
inside side
plate
Upper stud
inside side
plate
Cover 1
Cover 3
Inside of keypad
Tail of 5550 027
(orientation
tab indi-
cated by the arrow)
Cover 2
3 screws
