Service guide
March 2001
26
5550 014 Brake with clutch
Lower boom manually and remove
timing belt and retainer as
described in earlier sections.
Replace brake/clutch assembly.
Reinstall retainer and timing belt.
Refer to timing belt section
regarding belt tension.
5550 195 Bushing 2
5550 208 Bushing 5
Bushing 2 and 5 provide fitting of
3” paper rolls on two types of 2”
HP Design Jet roll spindle
assembly. For information on
selection and installation
procedure: Please see SpinJet
Operator’s manual.
5550 047 Assy, foot
extension set
On printers provided with
mounting holes on the side of the
printer legs (indicated on picture)
the set of two-foot extensions
can be installed.
Install the foot extension set with
pins and spring cotters and turn
the adjustment screws to stabilize
the printer.
Brake with
clutch
Location of foot
extension
Adjust-
ment
screw
Pins and
spring
cotters
