Service guide
March 2001
13
5551 001 Photo sensor
(PS02)
Dismount Guides 2 and Guide 5 as
well as Console 2 (picture).
Dismounting of the boom shaft
pulley on the left side is required.
Refer to section 5550 008 (pulley)
and 5550 066.
Swing down Guide 4, loosen,
remove and disconnect PS02.
Reassemble in reverse order. Make
sure to adjust to correct timing
belt tension as previously
described.
5551 001 Photo sensor
(PS03)
Lower boom by hand and
dismount the boom guide. Loosen
and remove PS03 with its pillar.
Disconnect and replace PS03.
Reassemble in reverse order.
PS03.
Screws of
pillar are
outside side
plate.
PS 02
Console 2
PS 02
located
inside
Guide 4
Boom
guide
