Techpro TRIDVR-EL8, User Manual

Page: 132 / 276

HDCVI Standalone DVR User’s Manual
151

Holiday: It is to set holiday setup. Please note you need to go to the General interface
(Main Menu->System->General) to add holiday first. Otherwise you can not see this
item.

Pre-record: System can pre-record the video before the event occurs into the file. The
value ranges from 1 to 30 seconds depending on the bit stream.

Redundancy: System supports redundancy backup function. You can highlight
Redundancy button to activate this function. Please note, before enable this function,
please set at least one HDD as redundant. (Main menu->Setting->Storage->HDD
Manager).
Please note this function is null if there is only one HDD.

ANR: Check the ANR box, DVR can auto record once the network camera is offline.
You can set the record period here. Please make sure you connected camera
supports the ANR function.

Period setup: Click button after one date or a holiday, you can see an interface
shown as in Figure 4-125.There are four record types: regular, motion detection (MD),
Alarm, MD & alarm.
Please following the steps listed below to draw the period manually.

Select a channel you want to set. See Figure 4-121.
Figure 4-121

Set record type. See Figure 4-122.
Figure 4-122

Please draw manually to set record period. There are six periods in one day. See
Figure 4-123.