Technoline WS8019, Instruction Manual

Page: 7 / 40

EN2
OVERVIEW
A
– Front view
A1: Low battery indicator A2: AM icon
A3: PM icon A4: NIGHT-LIGHT ON icon
A5: Time A6: Month / Date
A7: Weekday A8: Temperature
A9: RCC icon
B
– Back view
B1: DOWN / WAVE button B2:°C / °F button
B3: LED LIGHT ON-OFF / CLOCK SET button B4: TIME ZONE button
B5: UP button B6: Holder
B7: Battery compartment door B8: Battery compartment
B9: Insert 4 x AA batteries (not included)
Please read this instruction manual before using to enjoy the best product experience.
BATTERY INSTALLATION

Remove the protective film at the front of the clock.

Place your clock face down on a flat and soft surface.

Slide and remove the battery cover at the back of your unit.

Insert 4 x new AA batteries into the battery compartment by observing the correct “+” and “-“
polarity.

Slide and replace the battery cover.
VIEWING ANGLE OF THE LCD
This clock is designed primarily as a wall clock so the LCD is optimized at eye level or lower viewing
angle. If you use it on the table top, the LCD is good for upper viewing by keeping around 1-meter
distance or more.
ENVIRONMENTAL RECEPTION EFFECTS
The clock obtains the accurate time with wireless technology. Same as all wireless devices, the
reception is maybe affected by the following circumstances:

long transmitting distance

nearby mountains and valleys

near freeway, railway, airports, high voltage cable etc.

near construction site

among tall buildings

inside concrete buildings

near electrical appliances (computers, TV’s, etc) and metallic structures

inside moving vehicles