AutoGRAPH-NAVIGATOR • USER MANUAL
35
TechnoKom © 2015
Task management
AutoGRAPH-NAVIGATOR supports task management function providing control of tasks
performance by a driver.
New task
Task files are created in the Task editor supplied with the AutoGRAPH.NET software. The
compiled task file can be sent to AutoGRAPH-NAVIGATOR via server or manually loaded in
the device SD-card. The transmission via server is provided by Chat module supplied with the
AutoGRAPH.NET software.
To create task file:
•
Run the AutoGRAPH.NET software and install the Task editor if it hasn’t been installed yet.
•
Install the Chat module if it is necessary to send task file to AutoGRAPH-NAVIGATOR via
server.
•
Task file is compiled on the basis of geofences list. Add all required geofences into the
Task editor, then set geofences order and specify task options.
•
Save the task file. To sent the file to the device via server, select
Save and sent
option in
the Task editor. To save the file in the device SD-card, select
Save as
option.
•
The Task Editor creates following files: .kml, .agth. и agtz. The .kml, .agth. files are required
to copy load task in the device SD-card. All task files must be stored in the «Tasks» folder
located in the SD-card root directory. Sample structure of «Tasks» folder is given on
•
The .agth file is required to send the task to the device via server. This file must be sent to
the device using Chat module.
•
Also sound files can be associated with task file to play them when vehicle enters task
points.
•
Sound files can be matched to task file using the Editor of public transport stops supplied
with the AutoGRAPH.NET software. Also all necessary sound files must be copied in the
\Tasks\Wav
directory in the device SD-card.
Task file is a list of geofences which a vehicle must enter to. Depending on settings, task can be exact
requiring the exact order of geofences passing and not exact allowing random order of geofences
passing. The task is considered to be completed, if all geofences of task are passed.
i
NOTE
To ensure file transmission via server servicing the AutoGRAPH-NAVIGATOR device, the device must
be added in the AutoGRAPH.NET software, as well as the user sending the file must have access to the
device data.
IMPORTANT
