AutoGRAPH-NAVIGATOR • USER MANUAL
15
TechnoKom © 2015
To turn on the device when external power is disconnected:
•
Press and hold Switch On/Off button located on the device front panel, for 3 seconds. The
device will start loading.
•
When external power is disconnected, the device is powered by internal backup battery.
An approximate battery life time is 1 hour.
Before turning on the device, when it is powered by internal battery, ensure that the battery is charged.
Otherwise, the device doesn’t turn on.
IMPORTANT
Fig.4. Turn off confirmation.
When the device system have been loaded, the device runs the work screen – Navigation
menu. This menu is intended to navigate and track an asset, and calculate route to the
selected destination.
To go to the main menu, press the Menu button on the lower right of work screen (
Fig.8). Main
menu provides quick access to the device main options.
Device turning off
•
To turn off the device using the Switch On/Off button, press and hold it for 3 seconds. The
device will prompt the user to confirm its turning off (
). Press Yes to turn off the device
or press No to cancel turning off and continue operation.
•
The device can be turned off by virtual button. To do it, go to the Settings menu and press
the TURN OFF button (
To prevent over-discharging of the internal battery, automatic device turning off is provided
when the external power is disconnected. When the external power turns off, the device
notifies the user about it using voice and text notifications and prompts the user to turn off the
Fig.5. Notification of external power turn off.
