AutoGRAPH-NAVIGATOR • USER MANUAL
30
TechnoKom © 2015
Address searching
To search for an address on the map, go to the Navigation menu and press the Searching
button on the device front panel.
Alternatively you can open this menu as follows:
•
in the Navigation menu, click a map and hold until the Route menu appears;
•
in the Route menu, press “Select address”.
In the Select address menu (
), first you need to enter a city to search. The device
will show a list of items found in the installed address base. Next you need to select an
appropriate item in the list of available variants. In a similar way you need to select street and
house number for searching.
Fig.23. Searching button.
Fig.24. Select address menu.
As an address is selected you can
find it on map pressing the button
“ON MAP” on the upper right of the
main screen.
To calculate a route to the selected
address, press the “ROUTE” button.
Address base installation
AutoGRAPH-NAVIGATOR uses default address base, loaded in the device SD card. If
you need to use other address base, you may copy the necessary address base file in the
\AddressBase directory on the device SD card. Only one address base file can be stored
in this directory. All address base files which are not used must be removed from the
\AddressBase directory
AutoGRAPH-NAVIGATOR supports address base of the .aga2 format. This is a format used
in the AutoGRAPH 5 Dispatch Software.
