16
Connections
Speakers/AC power supply cord
LAN
DIGITAL IN
10BASE-T /
100BASE-TX
OPT
COAX1
COAX2
PC
PHONO
PHONO
EARTH
LINE IN
SPEAK
HAUT-PA
(4 〜
Class 2
LAN
DIGITAL IN
10BASE-T /
100BASE-TX
OPT
COAX1
COAX2
PC
PHONO
PHONO
EARTH
LINE IN
SPEAK
HAUT-PA
(4 〜
Class 2
•
Use only the supplied AC power supply cord.
•
Do not connect the AC power supply cord until all other connections are complete.
•
Insert the plugs of the cables to be connected all the way in.
•
Do not bend cables at sharp angles.
•
To optimize the audio output, you can measure the amplifier output signal and correct its
output when it is connected to the speakers. (
41)
(16)
Speaker cable (not supplied)
Speaker connection
1 Turn the knobs to loosen them, and
insert the core wires into the holes.
2 Tighten the knobs.
Note
•
When the connections are completed, pull the
speaker cables lightly to check that they are
connected firmly.
•
Be careful not to cross (short-circuit) or reverse
the polarity of the speaker wires as doing so
may damage the amplifier.
DO NOT
•
Wire the polarity (+/-) of the terminals correctly.
Not doing so may adversely affect stereo
effects or cause malfunction.
•
For details, refer to the operating instructions of
the speakers.
