manualshive.com logo in svg

Technicolor TG672, Setup And User Manual

Share
Download
Technicolor TG672 Setup And User Manual Download Page 92

84

7 SAVING ENERGY WITH YOUR TECHNICOLOR GATEWAY

E-DOC-CTC-20100728-0008 v2.0

7.1 Code of Conduct

Power states

Code of Conduct provides rules for the power consumption in:

Full power state:
This is the normal operation mode of the device, where all functionality is enabled.

Low power state:
When there is no user traffic on the device, the device should switch to low power mode. This is a state in which devices 
are only allowed to use a limited amount of energy to be able to power its components and respond to user activity.

Example

Take the following example:

The user switches off his computer at 20:00.

There are no other devices connected to the Technicolor Gateway.

The Technicolor Gateway switches to low power mode. This results in a considerable drop in the overall power consumption 
of the Technicolor Gateway.

No user traffic

User traffic

Time

Power

Consumption

Full power limit

Low power limit

20:00

Summary of Contents for TG672

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands