manualshive.com logo in svg

Technicolor TG672, Setup And User Manual

Share
Download
Technicolor TG672 Setup And User Manual Download Page 40

32

3 MANUAL INSTALLATION

E-DOC-CTC-20100728-0008 v2.0

3.3.2 Setting up a Wired Connection

Requirements

Both your network device (for example, a computer, a gaming console,...) and Technicolor Gateway must have a free 
Ethernet port.

Your network device must be configured to obtain an IP address automatically. This is the default setting.

Ethernet cable

In your package, you will find a cable with yellow connectors. This is the Ethernet cable.

Procedure

Proceed as follows:

1

Connect one end of the Ethernet cable to one of the 

yellow

 Ethernet ports of your Technicolor Gateway: 

2

Connect the other end of the Ethernet cable to your network device.

3

Your network device is now connected to your network. No additional configuration is needed unless specified by your 
service provider.

You can not use the red 

WAN

 port to connect to the local Ethernet network. The 

WAN

 port can only be used to 

connect your Technicolor Gateway to your broadband source.

For more information, see 

“1.2 User Scenarios” on page 6

.

The Technicolor Gateway does not support Power over Ethernet (PoE). All network devices that are connected 
to the Technicolor Gateway must be powered by their own power source.

Summary of Contents for TG672

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands