manualshive.com logo in svg

Technicolor TG672, Setup And User Manual

Share
Download
Technicolor TG672 Setup And User Manual Download Page 41

33

3 MANUAL INSTALLATION

E-DOC-CTC-20100728-0008 v2.0

3.4 Configure the Technicolor Gateway

Introduction

If your service provider did not preconfigure your Technicolor Gateway, you may have to configure the Technicolor 
Gateway via its Graphical User Interface (GUI).

Requirements

JavaScript must be enabled on your web browser (this is the default setting). For more information, consult the help of your 
web browser.

Procedure

Proceed as follows:

1

Open your web browser.

2

The Technicolor Gateway informs you that you have not yet configured your Technicolor Gateway.

If this window does not appear, browse to http://dsldevice.lan or to the IP address of your Technicolor Gateway (by 
default: 192.168.1.254) and click 

Technicolor Gateway

 on the menu on the left-hand side.

3

Click 

Setup my Technicolor Gateway

.

4

The 

Easy Setup

 wizard appears. This wizard will guide you through the configuration of your Technicolor Gateway. Click 

Next

 and follow the instructions.

Summary of Contents for TG672

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands