Technicolor TG672 Setup And User Manual Download Page 27

Page: 27 / 152

1 GETTING STARTED

E-DOC-CTC-20100728-0008 v2.0

1.5 Preparing for the Installation

DSL service requirements

This section is only applicable if you are using your Technicolor Gateway as DSL gateway. For more information, see

“1.2 User Scenarios” on page 6

Make sure that:



Your service provider activated the DSL service on your telephone line by your service provider.



You have the installation information (for example, user name, password, service profile,...) provided by your service
provider at hand.

Local connection requirements

Wireless connection

If you want to connect your computer using a wireless connection, your computer must be equipped with a WiFi-certified
wireless client adapter.

Wired connection

If you want to connect a computer using a wired connection, your computer must be equipped with an Ethernet Network
Interface Card (NIC).

Start with the installation

You are now ready to start with the installation of your Technicolor Gateway.

Summary of Contents for TG672

























































































































































Search results

Summary of Contents for TG672

Reviews:

Brands by name

Popular brands

Technicolor TG672, Setup And User Manual

Search results

Summary of Contents for TG672

Reviews:

Brands by name

Popular brands