Technicolor TG672, Setup And User Manual

Page: 114 / 152

106
9 SHARING YOUR USB PRINTER
E-DOC-CTC-20100728-0008 v2.0
9.3.1 How to install a printer on Windows 7/Vista
Requirements
Your computer must be connected to the Technicolor Gateway. For more information, see “3.3 Connecting Your Network
Devices to the Technicolor Gateway” on page 30 .
Your printer has not yet been installed on your computer
In this case, proceed as follows:
1 On the Windows Start menu, click Devices and Printers .
2 On the bar on the top, click Add a printer .
3 The Add Printer Wizard appears. Select Add a local printer .
4 Select Create a new port and select Standard TCP/IP Port from the drop-down list. Click Next .
5 The Type Hostname or IP address page appears. Complete the following fields:
 Hostname or IP address : enter 192.168.1.253 .
 Port Name : enter a name for your port (for example, Technicolor Printer Port).
Click Next .
6 The wizard now attempts to automatically detect the printer. This will take a one or two minutes.
7 The wizard prompts you that additional information is needed. Select Custom and click Settings .
8 The Configure Standard TCP/IP Port Monitor appears.

Configure the following settings:
 Under Protocol , select LPR .
 Under LPR Settings:
1 Type the name that you have configured in the Technicolor Gateway in the Queue Name box (for the typical
configuration in Configuring The Printer Sharing Service on Your Technicolor Gateway the name is myprinter ).
2 Select LPR Byte Counting Enabled .
Click OK to confirm these port settings and click Next to continue in the Add Printer wizard.
9 The Install the printer driver window appears.

Select the manufacturar of your printer from the Manufacturar list and then select the printer model from the Printers
list and click Next .
10 The Type a printer name window appears.

In the Printer name box type the name that you want to give to this printer and click Next .
(Optionally) When asked if printer sharing via your computer should be enabled, select Do not share this printer and
click Next to confirm.
11 Select Print a test page to print a test page with the newly installed printer or Finish to close the Add Printer Wizard .
Your printer has already been installed on your computer
In this case you only need to create the necessary printer ports. Proceed as follows:
1 On the Windows Start menu, click Devices and Printers .
2 Right-click the printer to be shared, click Printer Properties and go to the Ports tab.