manualshive.com logo in svg

Technicolor TG672, Setup And User Manual

Share
Download
Technicolor TG672 Setup And User Manual Download Page 14

6

1 GETTING  STARTED

E-DOC-CTC-20100728-0008 v2.0

1.2 User Scenarios

Scenarios

Depending of the architecture of your home network, you can use the Technicolor Gateway in either of the following 
scenarios:

DSL Gateway

Local Router

DSL Gateway

The Technicolor Gateway is connected to the DSL network of your service provider and brings the Internet to your home.

Local Router

The Technicolor Gateway is placed behind another gateway or modem. In this setup the gateway or modem in front of the 
Technicolor Gateway will establish the connection to the Internet:

This scenario is used when:

The Internet connectivity is provided by another device (for example, a cable modem). The Technicolor Gateway is used 
to add specific services to your home network.

Your service provider is using Ethernet in the First Mile (EFM).
The Ethernet signal is directly coming into your home.

Your service provider is using Ethernet To The Home (ETTH).
Technicolor Gateway is directly connected to the terminator of your service provider’s fiber-optic network and your local 
network 

Internet

Technicolor Gateway

Internet

Modem/Router

Technicolor Gateway

Summary of Contents for TG672

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands